Pvc ceiling buckle installation steps pvc ceiling buckle plate advantages and disadvantages

Ceiling plays a vital role in home renovation. It can not only be decorative, but also effective in heat insulation, sound absorption, and moisturizing. So every family will install ceilings, and now the most popular ceiling is pvc ceiling buckles. So, pvc ceiling wall panel installation steps, what does? Pvc ceiling pinch of the advantages and disadvantages and what does? Just below the small series with a look!

Pvc ceiling buckle installation steps

1. Lines, pvc ceiling buckle plate installation must first pop up the elevation line around the wall, but also at both ends of the wall with cement nails fixed pressure lines, and then according to the standard height of the spring around the wall pop-line, this is as The standard line for the ceiling installation has an allowable error in the range of 5 mm.

2. The next step is to install the main girder, which is to fix the side keel with cement nails along the elevation line, and then install the keel after confirming the position of the keel. It should be noted here that the keel can be omitted from the small bathroom or kitchen. If the ceiling area is large, the keel can be laid in the middle. When laying the keel, leave the exit of the lighting line.

3. Install the wooden keel. At this time, it is necessary to maintain the level of the keel around the wall. For suspended ceiling spacing, no ceilings are generally 1200 to 1500 mm, and ceilings for individuals are generally 900 mm to 1200 mm.

4. The final step in the installation of the pvc ceiling buckle is the installation of the panel. Before this, the installed keel and plate must be inspected and installed only after meeting the requirements. The direction of installation of the pvc ceiling buckle plate is determined according to the length of the plate material. If the longitudinal material and the horizontal material are similar, it can be installed in the direction of the light.

Pvc ceiling buckle advantages

1. pvc ceiling buckle lightweight waterproof acid and alkali, while its weight is also very light, easy to install. This is the most ideal material for the bathroom and kitchen.

2. pvc ceiling buckle plate affordable, because the material is more common, so the price is relatively cheaper than the price of mineral wool board ceiling and gypsum board ceiling, is a popular material.

3. The pvc ceiling buckle plate is non-toxic, harmless and environmentally friendly, and it will not stimulate the human respiratory system and skin. And for those who paint allergies and wood, pvc ceiling buckles are the most suitable.

4. pvc ceiling buckle plate is easy to install and remove, as long as the one side of the pressure strip removed, and then the plate-by-block out of the pressure strip, and then replace the damaged plate with a new plate, and then pressed the pressure layer on it.

5. Because pvc ceiling buckles do not pick up dust, they are easier to clean and save. They can also be painted.

The disadvantages of pvc ceiling buckle

1. The performance of pvc ceiling buckle is not very stable, because it is a plastic material, so even if it does not meet the water, but time will be deformed.

2. The pvc ceiling buckle has a faster aging and is easy to change color. The service life is relatively short.

3. The useless pvc suspended ceiling is more difficult to handle, so it will cause some pollution to the environment, and its environmental protection is low.

4. pvc ceiling buckle plate in the high temperature environment is more easily deformed, high temperature performance is not good.

Article Summary: The raw material for pvc ceiling buckles is PVC. This raw material is easy to install, moisture proof, and waterproof. So many consumers will choose to install pvc ceiling buckle plate at home. The above pvc ceiling buckle installation steps and the advantages and disadvantages of pvc ceiling buckle plate can be used for reference.